Step 1: Get Your Cleaning Materials and Chemicals
Unusually, the first item you require is an easy one; A bucket. A five-gallon pail would work well. If you don't have one you can get one from your local hardware shop or retail giant. Then you need some bleach. This can be in the form of a liquid or a powder cleaner. (There is likewise services such as Simple Green's House and Siding Cleaner readily available in your home improvement shops.) Finally, you need a scrubby of sorts. A sponge with a rough side will work perfectly. It might not be wise to utilize a steel wool pad as that can take the paint totally off your garage door. You can also utilize a semi-soft brush with a deal with, which might be a little much easier. Also, be sure to use a pair of gloves, either leather or latex.
Step Two: Preparation Work
Once you have all your garage door cleaning materials, fill the (5 gallon) bucket up midway and put those gloves on. Then gather about half a cup of bleach. That might appear like a small amount but it is necessary not to overdo it with the bleach. Of course, if you are not comfy using bleach, there are a couple of alternatives. Dish soap will work, just not too. Multi-purpose cleaner (without bleach) also works, but once again, not as well.
Step 3: Prepared Set Clean!
Now you are all set to clean that garage door! Make certain you get every panel and every fracture and crevice. It is usually much better to do the top first and work your method over from one side to the other. Then you can do the exact same thing for the bottom. Make sure to put some effort into it and get any spots of mold or mildew off. As soon as the garage door is completely scrubbed down, you can rinse it off with the tube or just by filling the container a few times. As always, if you have any questions or observe you need some garage door repair services, simply call a Los Angeles garage door repair expert!